Mitsubishi Electric MELSEC iQ-R Series - Network-Related Switch Settings of Module

52
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
5.1 System Configured by a Safety CPU
Network-related switch settings of module
Set network-related switches on modules as follows.
Safety CPU
There is no network-related switch.
Safety function module
There is no network-related switch.
CC-Link IE Field Network master/local module
There is no network-related switch.
Safety remote I/O module
Set the station number setting switches.
The setting value of the station number becomes valid when the module is powered on. Set the station
number when the system is powered off.
Standard remote I/O module
Set the station number setting switches.
The setting value of the station number becomes valid when the module is powered on. Set the station
number when the system is powered off.
Switch number in the figure above Remote I/O
Module number
CCIEF remote (1)
SR_IO1
(1) Station number setting switch 1
Switch number in the figure above Remote I/O
Module number
CCIEF remote (2)
R_IO2
(1) Station number setting switch 2
NZ2GFSS2-32D (1) NZ2EXSS2-8TE
(1)