Mitsubishi Electric Melsec-Q172DCPU - Page 133

2 - 100
2 SYSTEM CONFIGURATION
(b) Q173DCPU(-S1)/Q172DCPU(-S1)
1) Set Q6BAT to Battery holder unit(Q170DBATC).
2) Connect the lead connector of Q6BAT to the connector (BATTERY) of
Q170DBATC.
3) Connect between the connector (BAT) of Motion CPU module and
connector (CPU) of Q170DBATC.
0.5[m]
(1.64[ft.])
Battery holder unit
(Q170DBATC)
BAT
Motion CPU module
Battery cable
(Q170DBATCBL )
MITSUBISHI
LITHIUM BATTERY
Q6BAT