53
Function settings
Example of the energy-save control assist function settings
Setting item Setting example
Invalid item setting
(option settings)
Day and time
1 7:00AM → 5:00PM
With Brightness sensor
2 Light
Energy-save control mode
3 Set temperature offset
(Offset value: 4ºF)
Auto-away time
4 0:10 (10 minutes)
7:00AM 5:00PM
Normal control Normal control
Because the settings for the items under [Invalid item setting] are
made, the energy-save control will not be performed at these times even
when the occupancy sensor detects vacancy.
Period during which energy-save control can not be performed even
when vacancy is detected
Period during which energy-save control can be performed when vacancy
is detected
Energy-
save
control
Energy-
save
control
4 Auto-away
time
(10 min.)
Light
Occupied
70ºF
1 Time
(1 + 2)
3 Set temp.
(Heat)
Dark
Vacant
66ºF
Auto-away time
count restarts.
Auto-away time
count restarts.
2
To Next Page
Loading...
