4 - 37
CPU MODULE4.
(4) Setting example
The followings shows the setting examples with and without the expansion timer:
(a) Setting example when the expansion timer is not used
Number of occupied points: 256 (100ms timer: 120 points, 10ms timer: 40 points,
retentive timer: 48 points, 1ms timer: 48 points)
According to the setting above, the devices designated for the 100ms timer are
T0 to T119, for the 10ms timer are T120 to T159, for the retentive timer are T160
to T207, and for the 1ms timer are T208 to T255.
LEDB ZHTIME
SUB K208
LEDR
M9037
To Next Page
Loading...
