EasyManua.ls Logo

Mitsubishi Electric Q13UDVCPU - Page 581

Mitsubishi Electric Q13UDVCPU
720 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
579
APPENDICES
A
Appendix 3 List of Special Register Areas
*1 The QnUDVCPU whose serial number (first five digits) is "17012" or later supports the backup/restoration function for
AnyWireASLINK and CC-Link.
The QnUDVCPU whose serial number (first five digits) is "17052" or later supports the backup/restoration function for
CC-Link IE Field Network.
The QnUDVCPU whose serial number (first five digits) is "18072" or later supports the backup/restoration function for
built-in Ethernet.
*2 Built-in Ethernet port LCPU whose serial number (first five digits) is "14112" or later
SD1457
Error device
Information (device
1) (iQ Sensor
Solution
backup/restoration)
Stores the
information of a
device where a
backup/restoration
error is detected
first.
This register stores the information of a device
(device 1) where a backup/restoration error
occurs.
[AnyWireASLINK]
ID number
[CC-Link, CC-Link IE Field Network]
Station number
[Ethernet]
IP address (lower 16 bits)
(Example) If the IP address is 192.168.3.40, 3
equals to 3
H
and 40 equals to 28
H
.
The stored value will be 0328
H
, that is, 808.
When errors are detected in multiple devices,
the information of a device (device 1) where
the error detected first is stored.
A value is cleared to "0" when the right is
acquired.
S
(Error/Status
change)
New
QnUDV
*1
LCPU
*2
SD1458
Error device
Information (device
2) (iQ Sensor
Solution
backup/restoration)
This register stores the target-device (device 2)
information for which a backup/restoration error
occurs.
[AnyWireASLINK]
0 (Not used)
[CC-Link, CC-Link IE Field Network]
Station sub-ID number
[Ethernet]
IP address (upper 16 bits)
(Example) If the IP address is 192.168.3.40, 192
equals to C0
H
and 168 equals to A8
H
.
The stored value will be C0A8
H
, that is, 49320.
When errors are detected in multiple devices,
the information of a device (device 2) where
the error detected first is stored.
A value is cleared to "0" when the right is
acquired.
Number Name Meaning Explanation
Set by
(When Set)
Corresponding
ACPU
D9
Corresponding
CPU

Table of Contents

Related product manuals