Mitsubishi Electric Q170MSCPU - 2.1.2 Q170 MSCPU System internal configuration

35
4 WIRING
4.1 Connecting to the Power Supply
The following diagram shows the wiring example of power lines, grounding lines, etc. to the
Motion controller.
*1 The operation of the ERR terminal is always OFF (open).
Grounding
Ground wire
Grounding
Ground wire
Extension cable
ERR
Extension base unit (Q68B)
24V
DC
Q61P I/O module
24VDC
100/200VAC
AC DC
AC
AC
DC
24VDC
Connect to power
input terminals of
I/O signals that
require 24VDC.
Fuse
Ground wire
LG
INPUT
100-240VAC
FG
*1
Grounding