Mitsubishi Electric QJ71MES96N - Project File Handling; Creating a New Project; Opening a Project

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.4 Project File Handling
7.4.1 Creating a new project
7 - 9
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND PROCEDURE TO OPERATION
5
INSTALLATION AND UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
8
DB CONNECTION SERVICE AND SETTING TOOL
7.4 Project File Handling
This section explains how to handle project files.
MES Interface Function Configuration Tool treats the MES interface function settings for a
single MES interface module as one project.
7.4.1 Creating a new project
Create a new project.
When a new project is created, the project currently being edited is discarded.
1 Perform either of the following:
• Click (New).
• Select [Project] [New] from the menu.
7.4.2 Opening a project
Retrieve an existing project.
1 Perform either of the following:
• Click (Open).
• Select [Project] [Open] from the menu.
2 The [Open] dialog box is displayed
Set the following items and click the button.
Figure 7.12 [Open] dialog box
Table 7.7 Setting items in the [Open] dialog box
Item Description
Look in Select the location where the project is stored.
File name Specify a project file name.
Files of type
Select a project file type.
• MES interface function project file (*.mup)
Open