Mitsubishi Electric QJ71MES96N - Setting Items in Operation Action

7 - 120
7.11 Job Setting - Actions
7.11.4 Setting items in Operation action
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.11.4 Setting items in Operation action
Configure the settings for operation of tag component values.
Up to 20 dyadic operations can be set for one operation action.
1 Performing the operation for adding or modifying an action displays the [Operation
action] dialog box.
Make the setting referring to the following descriptions.
Clicking the button after setting adds or modifies the action.
For the operation for adding or modifying an action, refer to the following:
Section 7.11 Job Setting - Actions
Figure 7.93 [Operation action] dialog box
OK
1)
8) 9) 10) 11)
2) 3) 4) 5) 6) 7)