7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.12 Online
7.12.2 Writing the MES interface function settings
7 - 125
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND
PROCEDURE TO
OPERATION
5
INSTALLATION AND
UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE
FUNCTION
CONFIGURATION TOOL
8
DB CONNECTION
SERVICE AND
SETTING TOOL
7.12.2 Writing the MES interface function settings
Write the MES interface function settings (project) to the MES interface module.
1 Perform either of the following:
• Click (Write).
• Select [Online] [Write] from the menu.
2 A dialog box asking for confirmation is
displayed. Clicking the button starts
writing.
3 Upon completion of writing, a dialog box
appears, asking for confirmation of the setting
update.
(When button is clicked)
4 Clicking refreshes the setting data to the
MES interface module.
(When button is clicked)
5 Clicking does not refresh the setting data to
the MES interface module.
Perform any of the following operations later.
Perform [Update settings]
Section 7.13.2 (3)
Power OFF and then ON
6 Reset the programmable controller CPU
Figure 7.96 Writing the MES interface function settings
To Next Page
Loading...
