Mitsubishi Electric QJ71MES96N - Operating the DB Buffering

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.13 Online - Remote operation
7.13.6 Operating the DB buffering
7 - 143
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND PROCEDURE TO OPERATION
5
INSTALLATION AND UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
8
DB CONNECTION SERVICE AND SETTING TOOL
7.13.6 Operating the DB buffering
Operate the DB buffering.
For the DB buffering function, refer to the following:
Section 6.1.10 DB buffering function
(1) Resending data stored in the DB buffer
1 Selecting the [Resend] radio button and clicking the button executes the
resend processing of the SQL texts stored in the DB buffer, when manual resend
is selected for the jobs of the SQL texts or stored procedure execution request.
If the resend processing fails, the error code, 0B83h, is output to the error log.
(2) Clearing the DB buffer
1 Selecting the [Clear] radio button and clicking the button clears all of the
SQL texts or stored procedure execution request that are stored in the DB buffer.
If clear processing is executed during resend processing, error code 0B44h may
be output.
Section 10.2 Error Code List
If this error occurs, execute the Clear error and turn off the ERR. LED.
Section 7.13.2 (4) Clear error
Figure 7.111 [DB buffering operation]
Execute
Execute