Mitsubishi Electric QJ71MES96N - Accessible Devices and Ranges

3
SPECIFICATIONS
3.2 Accessible Devices and Ranges
3 - 6
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND PROCEDURE TO OPERATION
5
INSTALLATION AND UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
8
DB CONNECTION SERVICE AND SETTING TOOL
(2) Accessible routes
(a) Single network
: Accessible ×: Inaccessible
Figure 3.1 Single network
Table 3.4 Single network
Network communication
route
Access target CPU (PLC series)
QCPU (Q mode)
*7
RCPU
*11
LCPU QnACPU
QCPU (A mode),
ACPU
C Controller
module
CC IE Control, NET/10(H)
*12
×
*6
Ethernet
*8 *1 *1 *1*10 *1 *2
××
CC IE Field
*4 *5
××
*9
Figure 3.2 Single network
Network 8Network 1
Relay
station
Relay
station
Network 2 to 7
MES interface
module
Network
module
Network communication route
Access target CPU
The network is any of CC IE Control, NET/10(H), Ethernet, or CC IE Field.
The following lists CPU modules that can be used on the network communication route.
Use a QCPU (Q mode) or RCPU as a control CPU for the network module.
For accessible CPU modules, refer to the following.
Relay station
Access target CPU
Use a QCPU (Q mode) or RCPU as a control CPU for the MES interface module and network module.Request source
Request
source
C24 multidrop
CC-Link
Network
communication
route
Access target CPU
MES interface
module
Network
module
For accessible CPU modules, refer to the following. Access target CPU
Use a QCPU (Q mode) or RCPU as a control CPU for the MES interface module and network module.Request source
Request
source
The following lists CPU modules that can be used on the network communication route.