Mitsubishi Electric QJ71MES96N - Setting Items in Program Execution

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.10 Job Setting
7.10.3 Setting items in Program execution
7 - 75
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND PROCEDURE TO OPERATION
5
INSTALLATION AND UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
8
DB CONNECTION SERVICE AND SETTING TOOL
7.10.3 Setting items in Program execution
Configure the settings for the program execution function.
For the program execution function, refer to the following:
Section 6.1.9 Program execution function
1 Click the button of [Before actions] or [After actions].
• Before actions:
Set a program to be performed before execution of the first action of the job.
• After actions:
Set a program to be performed after execution of the last action of the job.
2 [Program execution settings before action execution] or [Program execution settings
after action execution] is displayed.
Make the setting referring to the following descriptions.
After completing the setting, click the button.
Figure 7.60 [Program execution]
Figure 7.61 [Program execution settings before action execution]
Setting
OK