Mitsubishi Electric XD600U User Manual

9
DLP™ PROJECTOR
MODEL
XD600U/XD600U-G
WD620U/WD620U-G
User Manual
XD600U
XD600U-G
WD620U
WD620U-G
This User Manual is important to you.
Please read it before using your projector.
EN
ENGLISH
Downloaded From projector-manual.com Mitsubishi Manuals

Mitsubishi Electric XD600U Specifications

General

Brightness	6000 lumens
Contrast Ratio	2000:1
Display Technology	3LCD
Projection Size	40 - 300 inches
Lamp Life	5000 hours (ECO mode)
Connectivity	S-Video, Composite
Power Consumption	270W

Summary

Important safeguards

Overview

Control panel and terminal board

Describes the projector's control panel buttons and input/output connectors.

Remote control functions

Details the functions and buttons of the remote control.

Installation

Projector layout and mounting guidelines

Provides dimensional layouts and guidelines for front, ceiling, and rear projection.

Basic connections

Connecting AV, DVD, HDTV, and computer devices

How to connect various video sources like AV, DVD, HDTV, and computers.

HDMI connection and computer interface

Instructions for connecting via HDMI and computer interfaces.

Preparation

Initial setup and projection angle adjustment

Steps for initial setup, connecting power, and adjusting the projection angle.

Basic operation

Powering on/off and instant shutdown

Step-by-step guide for turning the projector on/off and instant shutdown.

Adjusting image settings and features

How to adjust volume, aspect ratio, AV mute, and other basic image parameters.

Menu operation

QUICK MENU and DETAIL MENU navigation

Explains the projector's menu structure and navigation.

Common menu settings (IMAGE, INSTALLATION, FEATURE)

Details on adjusting image properties, installation, and general features.

Advanced menu settings (SIGNAL, NETWORK, INFORMATION)

Configuration options for input signals, network, and system information.

Image adjustment

Brightness, contrast, color, and tint adjustments

How to fine-tune image brightness, contrast, color, and tint.

Color temperature, enhancer, and gamma settings

Customizing white balance, enhancing color reproduction, and adjusting gamma.

Computer image adjustments and filters

Troubleshooting and adjusting computer images, position, sync, and using LPF.

Network settings

Setting projector name, password, and IP configuration

How to set network name, password, and IP configuration including DHCP.

Advanced features

Startup screen, freeze, magnify, and password function

Customizing startup images, pausing, magnifying, and managing password security.

Computer supervision and PJLink control

Using a computer for projector control, supervision, and PJLink integration.

Lamp replacement

Lamp replacement procedure and safety precautions

Step-by-step guide for safely replacing the projector lamp.

Lamp interval, replacement message, and time reset

Information on lamp life, replacement messages, and resetting operation time.

Troubleshooting

Power, no-image, and signal issues

Solutions for problems like projector not turning on, no image, or "NO SIGNAL" display.

Image quality and display problems

Troubleshooting for issues like shaking, blurring, distortion, or color tint.

Other issues, maintenance, and indicator meanings

Solutions for miscellaneous problems, maintenance tips, and indicator status.

Indicators

Power and Status indicator guide

Explains the normal and abnormal conditions indicated by the projector's LEDs.

Specifications

Technical specifications, dimensions, and connectors

Detailed technical data, dimensions, connector pinouts, and included items.

Computer mode RGB signal compatibility

Lists supported RGB resolutions and frequencies for computer modes.

Warranty, Support, and Service Information