Mitsubishi Heavy Industries BS3G Service Manual

(J \ After positioning the flyweights (5) on
camshaft, secure it by tightening the
round nut to the specified torque
wi thround nut wrench (A).
Tightening torque
5- 6 kgf.m
(36
- 43 Ibf·ft)
[49-59N·ml
(2) Install the control spring with its
opening facing the shackle.
6.3 Testing and adjustment
After assembling the governor properly,
the adjustments described below should be
effected on the test bench.
(1)
Fuel injection pump injection quantity
adjustment
Before adjusting the governor, be sure
to carry out the required injection
timing and injection quantity
adjustments on the fuel injection pump.
For the
adjustments, refer to 5.4
Testing and adjustment, Fuel Injection
Pump.
Install with its
opening facing
the shackle.
FUEL SYSTEM
402918
670164
23

Mitsubishi Heavy Industries BS3G Specifications

General

Brand	Mitsubishi Heavy Industries
Model	BS3G
Category	Engine
Language	English