4
*1 Unless data are sent concurrently from the AJ65BT-R2N and external-device
sides in Nonprocedural protocol mode, communication at 57600bps or
115200bps is available.
If data is communicated simultaneously, the RS-232 receive overrun error
(BB23
H) may occur.
*2 Combined use of CC-Link Ver.1.10-compatible cables, CC-Link dedicated
cables (Ver.1.00) and/or CC-Link high-performance cables is not allowed.
If cables of different types are used, normal data transmission cannot be
ensured.
Also, terminating resistors appropriate to the cable type must be used.
2.3 CC-Link Dedicated Cable Specifications
In CC-Link systems, use CC-Link dedicated cables.
The performance of the CC-Link system cannot be guaranteed when
any other than dedicated CC-Link cables is used.
For more information, visit the following website.
CC-Link Partner Association (http://www.cc-link.org/)
Remarks
Refer to the CC-Link Cable Wiring Manual issued by the CC-Link
Partner Association.
To Next Page
Loading...
Need help?
General
