5 - 1
MELSEC-A
5 PROGRAMMING
5
5 PROGRAMMING
The programming procedure, basic read/write programs, and program examples for
the AJ65SBT-64AD are described.
Refer to Section 3.6 for the remote registers and to the AnSHCPU/AnACPU/AnUCPU/
QCPU-A (A Mode) programming manual (dedicated instructions) for details of the
dedicated instructions.
5.1 Programming Procedure
Create a program which executes the AJ65SBT-64AD analog/digital conversion by
following the procedure below:
START
Perform moving average processing?
END
No
Yes
A/D conversion enable/prohibit specification
Input range setting
Moving average processing count setting
Specify the channel for which moving average
processing will be performed.
Read digital output value read
To Next Page
Loading...
Need help?
General
