ID3 tag information
The CD player can display ID3 tag information for
files that have been recorded with ID3 tag informa-
tion.
1. Press the TEXT button (6) for 2 seconds or
longer to switch to the ID3 tag information.
“TAG” will appear on the display for 2 sec-
onds, and then the ID3 tag information will
appear.
2. Then press the TEXT button (6) for less than
1 second repeatedly to make selections in the
following sequence: album name
track
name artist name normal display mode.
NOTE
l
To return from ID3 tag information to the
folder name, press the TEXT button (6)
again for 2 seconds or longer.
l
When there is no title information to be dis-
played, the display shows “NO TITLE”.
l
The display can show up to 11 characters. If
a folder name, track name, or item of ID3 tag
information has more than 11 characters,
press the PAGE button (7) to view the next
11 characters.
l
Folder names, track names and items of ID3
tag information can each be displayed up to a
length of 32 characters.
l
Characters that the CD player cannot display
are shown as an asterisk.
To use the external audio input
function
E00732200771
1- Auxiliary Audio connector (mini-jack)
2- AUX button
3- AUX display
You can listen to commercially available audio
equipment, such as a portable audio system, from
your vehicle’s speakers, by connecting the audio
equipment to the auxiliary audio connector (1).
NOTE
l
Use a stereo mini-jack connector to connect
the audio equipment to the auxiliary audio
connector.
To activate the external audio input
mode
1. Connect the headphone port of the portable
audio system to the auxiliary audio connec-
tor (1) using a commercially available con-
nection cord.
For pleasant driving
5-27
5
To Next Page
Loading...
Need help?
General
