2. Remove the socket and bulb assembly (A) to-
gether by pulling out, and then remove the
bulb by pulling out.
3. To install the bulb, perform the removal
steps in reverse.
Front turn-signal lamps
E01003800687
1. Turn the bulb socket anticlockwise to re-
move it. And remove the bulb from the sock-
et by turning it anticlockwise while pressing
in.
2. To install the bulb, perform the removal
steps in reverse.
Side turn-signal lamps
E01003900369
1. Remove the lamp housing by levering it to-
wards the front of the vehicle.
2.
Remove the socket and bulb assembly togeth-
er by turning it anticlockwise, and then re-
move the bulb by pulling out.
3. To install the bulb, perform the removal
steps in reverse.
Front fog lamps*
E01004001276
1. Remove the bezel (A).
2.
Remove the lamp mounting screws (B) and
pull the entire lamp bracket out.
Maintenance
8-26
8
To Next Page
Loading...
