EasyManuals Logo
Home>Mitsubishi>Automobile>COLT

Mitsubishi COLT User Manual

Mitsubishi COLT
273 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #206 background imageLoading...
Page #206 background image
WARNING
l
To prevent entry of exhaust gas from the
towing vehicle, set your air selection
switch to the recirculation position.
CAUTION
l
The person in the vehicle being towed
must pay attention to the brake lamps of
the towing vehicle and make sure the
rope never becomes slack.
l
Avoid sudden braking, sudden accelera-
tion and sharp turning; such operation
could cause damage to the towing hooks
or the tow rope.
People in the vicinity could be injured as
a result.
l
When towing or being towed down a long
slope, the brakes may overheat reducing
the effectiveness. In this situation, have
your vehicle transported by a tow truck.
9. When finished towing, remove the towing
hook, and stow it in the specified location.
(Refer to “Tools jack and tyre repair kit” on
page 6-06.)
When installing the cover on the bumper,
align the tab (D) with the hole in the vehicle
body and press the cover securely into place.
If your vehicle tows another vehicle
The rear towing hook (A) is located as shown in
the illustration. Secure the tow rope to the rear tow-
ing hook.
NOTE
l
Using any part other than the designated tow-
ing hook (A) could result in damage to the ve-
hicle body.
NOTE
l
Your vehicle should only be used to tow an-
other vehicle if the weight of the other vehi-
cle is less than the weight of your vehicle.
WARNING
l
Do not use the rear towing hook as a jack-
ing point.
For emergencies
6-21
6

Table of Contents

Other manuals for Mitsubishi COLT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi COLT and is the answer not in the manual?

Mitsubishi COLT Specifications

General IconGeneral
BrandMitsubishi
ModelCOLT
CategoryAutomobile
LanguageEnglish

Related product manuals