Support the bonnet by inserting the support bar in
its slot.
CAUTION
l
Note that the support bar may disengage
the bonnet if the open bonnet is lifted by
a strong wind.
l
Always insert the support bar into the
hole provided specifically for this pur-
pose. Supporting the bonnet at any other
location could result in the support bar
slipping out and lead to an accident.
To close
Unlatch the support bar (A) and clip it in its holder.
Slowly lower the bonnet to a position about 20 cm
above the closed position, then let it drop.
NOTE
l
If this does not close the bonnet, release it
from a slightly higher position.
l
Do not press down the bonnet hard with a
hand as it may damage the bonnet.
l
Push the support bar (A) down completely in-
to its holder.
CAUTION
l
Be careful that hands or fingers are not
trapped when closing the bonnet.
l
Before driving, make sure that the bon-
net is securely locked. An incompletely
locked bonnet can suddenly open while
driving. This can be extremely dangerous.
Maintenance
8-04
8
To Next Page
Loading...
Need help?
General
