Information display (when the ignition
switch is “OFF”)
E00528200026
Each time you lightly press the multi-information
meter switch, the display switches in the following
order.
1- Odometer
2-
Tripmeter
3-
Tripmeter
4- Service reminder (distance)
5- Service reminder (month)
Odometer
E00527800012
The odometer indicates the distance travelled.
Tripmeter
E00527900013
The tripmeter indicates the distance travelled be-
tween two points.
Example usage of tripmeter
and tripmeter
It is possible to measure two currently travel-
led distances, from home using tripmeter
and from a particular point on the way using
tripmeter .
To reset the tripmeter
To return the display to 0, hold down the multi-in-
formation meter switch for about 2 seconds or
more. Only the currently displayed value will be re-
set.
Example
If tripmeter is displayed, only tripmeter
will be reset.
NOTE
l
Both tripmeters and can count up to
9999.9 km (9999.9 miles).
When a tripmeter goes past 9999.9 km
(9999.9 miles), it returns to 0.0 km
(0.0 miles).
l
When disconnecting the battery terminal, the
memories of tripmeter display and dis-
play are erased, and their displays return
to 0.0 km (0.0 miles).
Service reminder
E00521300536
This displays the distance and number of
months until the next periodic inspection.
Refer to “Service reminder” on page
3-11.
Instruments and controls
3-05
3
To Next Page
Loading...
Need help?
General
