Mitsubishi FX Series - Modifying Equipment Parameters

Use the manual Beichen Automation BCNET-FX-S Ethernet communication processor
3.3.3 modification of equipment parameters
Under normal circumstances, the BCNET-FX-S module does not need to modify the
parameters of the normal communication has been.
1. Click the“Modify device parameters” button, in the pop-up dialog box, you can view the“Serial
interface parameters configuration” option
Item Interface, where the serial bus interface (PLC) is used to configure the
communication parameters between the module and the PLC, where the extension
Bus interface (HMI)] generally here the default parameters on the line, if you modify
one of the parameters, you need to click [ download parameters ]
Button to take effect.
A) serial bus interface (PLC) is used to configure the communication parameters between the
module and PLC.