Mitsubishi FX Series - Page 43

Use the manual Beichen Automation BCNET-FX-S Ethernet communication processor
Enable AP function: enable AP function, create hot spots;
Create hotspot name: module creates the SSID name of the AP hotspot, maximum
support 32 characters;
Create Hot Password: module to create Ap Hot Password, the maximum support of 64
characters;
Hotspot Encryption: module to create the AP hotspot encryption type, support no
password, WEP, WPA and WPA2, the default
WPA2 type; IP address of AP: module creates IP address of AP hotspot;
AP subnet mask: The Module creates a subnet mask for AP hotspots;
AP address pool scope: when the module creates AP hotspots, the IP address allocation scope that the
module can provide;
WiFi interface configuration > > modules to connect to AP hotspots