Mitsubishi FX Series User Manual

Use the manual Beichen Automation BCNET-FX-S Ethernet communication processor
The diagnosis information is divided into serial bus (PLC) , extended bus (HMI) ,
network interface information and system operation information
Serial Bus -LRB-PLC) : can view the current connection parameters and status of the module
PLC PLC, can view the total number of communication requests, correct
Response Times and error response times;
Extended Bus (HMI) : to view the current connection parameters and status of the
module and HMI, to view the total number of communication requests, positive
True response times and error response times;
Network interface information: can view the current TCP connection status of the
module, can view the total number of communication requests, the number of correct
responses
And the number of error responses;
System Operation Information: system operation time represents the total running
time of the module after power-on.
B)[ wi-fi interface status ]

Mitsubishi FX Series Specifications

General

Manufacturer	Mitsubishi Electric
Category	Programmable Logic Controller (PLC)
Series	FX Series
Programming Language	Ladder Logic, Instruction List, Structured Text, Function Block Diagram
Communication Interfaces	RS-422, RS-485, Ethernet, USB
Protocols Supported	Modbus RTU, Modbus TCP, CC-Link
Input Voltage	24 VDC, 100-240 VAC
Output Type	Relay, Transistor
Operating Temperature	0°C to 55°C