Multi-information meter switch
E00520000666
Each
time the multi-information meter switch is op-
erated, a sound is emitted and the multi-informa-
tion display changes between information such as
warnings, odometer, tripmeter, service reminder, en-
gine coolant temperature (Type 1), average and mo-
mentary fuel consumption, driving range, average
speed, and ACD (Active centre differential system)
operation display.
It is also possible to change elements such as the
language and units used on the multi-information
display by operating the multi-information meter
switch.
mark display screen (when
the ignition switch is “OFF”)
E00520100380
If
you press the multi-information meter
switch and return from the warning dis-
play screen to the previous screen, the
mark is displayed.
Refer
to “To return to the screen dis-
played before the warning” on page
3-08.
This mark is also displayed if there is an-
other
warning other than the one dis-
played. When the cause of the warning
display is eliminated, the mark goes
out automatically.
NOTE
l
When
the mark is displayed,
the
warning display screen can be
redisplayed on the information
screen.
Refer to “Information screen
(when the ignition switch is
“OFF“)” on page 3-07.
Refer to “Information screen
(when the ignition switch is
“ON”)” on page 3-11.
Information screen (when the ignition
switch is “OFF“)
E00520200668
Each
time you lightly press the multi-information
meter switch, the display screen switches in the fol-
lowing order.
To Next Page
Loading...
