NOTE
l
On
vehicles equipped with MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to make the ad-
justment. Refer to the separate owner’s man-
ual for details.
Dead Lock System*
E00305100169
The
Dead Lock System helps to prevent theft.
When the keyless entry system or the keyless oper-
ation function has been used to lock all of the doors
and rear hatch, the Dead Lock System makes it im-
possible to unlock the doors using the inside lock
knobs.
CAUTION
l
Do
not set the Dead Lock System when
someone is inside the vehicle. With the
Dead Lock System set, it is not possible to
unlock the doors using the inside lock
knobs. If you erroneously set the Dead
Lock System, unlock the doors using the
UNLOCK switch on the remote control
switch or using the keyless operation func-
tion.
Setting the system
E00305200199
1. Turn
the ignition switch to the “LOCK” posi-
tion.
Also, if a key was used to start the engine, re-
move the key from the ignition switch.
2. Get out of the vehicle. Close all doors and
rear hatch.
3. Press the LOCK switch (A) on the remote
control switch, the driver’s or front passen-
ger’s door lock/unlock switch (B), or the rear
hatch LOCK switch (C) to lock all of the
doors and rear hatch. The turn-signal lamps
will blink once.
4. Press the switch again within 2 seconds.
The
turn-signal lamps will blink three times
to show that the Dead Lock System has been
set.
To Next Page
Loading...
