Mitsubishi Lancer Sportback - Front Turn-Signal Lamps

4. Pull the bulb out of the socket.
5. To
install the bulb, perform the removal
steps in reverse.
Front turn-signal lamps
E01003801075
1. Remove
the clips (A) and clips (B), then re-
move the duct (C) and the upper cover (D).
Petrol-powered vehicles without turbocharger
Petrol-powered vehicles with turbocharger
Diesel-powered vehicles
2. Remove
the entire socket and bulb assembly
(E) by turning it anticlockwise.
*: Front of the vehicle
Maintenance
8-35
8
OG4E12E1