4. Turn the socket (F) anticlockwise to remove
it.
*: Front of the vehicle
5.
Pull the bulb out of the socket.
6. To
install the bulb, perform the removal
steps in reverse.
Position lamps (for vehicles equipped
with high intensity discharge head-
lamps)
E01003701146
1. To
create enough work space, turn the steer-
ing wheel all the way in the direction oppo-
site to the side you wish to replace.
2. Remove the clips (A) and screws (B) to turn
up the cover (C).
To Next Page
Loading...
