EasyManua.ls Logo

Mitsubishi Lancer Sportback - Automatic Air Conditioning

Mitsubishi Lancer Sportback
433 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Automatic air conditioning*
E00702400022
The
air conditioning can only be used while the en-
gine is running.
Control panel
E00702501147
A- Temperature control dial
B- Air selection switch
C- Blower speed selection dial
D- Air conditioning switch
E- Mode selection dial
F-
Rear window demister switch ® p. 3-58
NOTE
l
There is an interior air temperature sensor
(G) in the illustrated position.
Never place anything on top of the sensor,
since doing so will prevent it from function-
ing properly.
LHD
RHD
Blower speed selection dial
E00702800215
Select the blower speed by turning the blower
speed selection dial clockwise or anticlockwise.
The
blower speed will gradually increase as the di-
al is turned to the right.
Temperature control dial
E00703000416
Turn the temperature control dial clockwise or anti-
clockwise.
NOTE
l
While
the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial.
l
When the temperature is set to the highest or
the lowest, the air selection and the air condi-
tioning will be automatically changed as fol-
lows.
Quick Heating (When the temperature is
set to the highest setting) Outside air will
be introduced and the air conditioning
will stop.
Quick Cooling (When the temperature is
set to the lowest setting) Inside air will be
recirculated and the air conditioning will
operate.
For pleasant driving
5-12
5
OG4E12E1

Table of Contents

Related product manuals