Digital clock*
E00711800484
Automatic mode and manual mode are available
for digital clock adjustment.
Select the automatic mode or the manual mode by
performing the following operations:
1. Press the PWR switch (A) to turn ON the au-
dio system.
2. Enter the function setup mode by pressing
the TUNE switch (B) for 2 seconds or longer.
3. Press
the TUNE switch (B) repeatedly to se-
lect the CT (Clock Time) mode.
The order is: AF → CT → REG → TP-S →
PI-S → Language of PTY display → SCV
→ PHONE → Function setup mode OFF. (Re-
fer to “Function setup mode” on pages 5-25,
5-39.)
NOTE
l
Although
“PHONE” appears on the display,
the PHONE function is inoperative.
For pleasant driving
5-70
5
To Next Page
Loading...
