1- Information generated
2-
Cause eliminated
To return to the screen displayed before the warn-
ing display
Even if the cause of the warning display is not elim-
inated, you can return to the screen that was dis-
played before the warning display.
If you press the multi-information meter switch,
the
display screen switches to the screen that was
displayed before the warning display and the
mark (A) is displayed.
NOTE
l
Warning
display screens with a “
” or “ ”
mark displayed in the upper right of the
screen can be switched. If you want to switch
the display, press the multi-information me-
ter switch as follows.
“ ”: Press lightly.
“ ”: Press for about 2 seconds or more.
Redisplay of a warning display screen
When the mark is displayed, if you lightly press
the
multi-information meter switch a few times, the
warning display screen you switched from is dis-
played again. Refer to “Information screen (when
the ignition switch is “OFF“)” on page 3-07.
Door ajar warning display screen
(when the ignition switch is “OFF”)
E00520600516
If
any of the doors or the rear hatch is not complete-
ly closed, this displays the open door or rear hatch.
To Next Page
Loading...
