Other interrupt displays (when the ignition switch is “ON”)
E00524200767
The operation status of each system is displayed on the information screen. Refer to the appropriate page for the system for further details.
Screen type 1 Screen type 2 System operation status Reference
l
When the Active Stability Control (ASC) is op-
erating
Refer to “Active stability control (ASC)” on page
4-52.
l
When
the reversing sensor system detects an ob-
struction
Refer to “Reversing sensor system” on page 4-59.
This informs you that a periodic inspection is due.
Screen type 1 Screen type 2 Solution
We recommend you to have it checked.
Refer to “Service reminder” on page
3-12.
The setting for rest interval can be changed.
Instruments and controls
3-37
3
To Next Page
Loading...
