ABS warning lamp/display
E00607201193
Warning lamp
Warning display type 1
Warning display type 2
If there is a malfunction in the system, the ABS
warning
lamp will come on and the warning dis-
play will appear on the information screen in the
multi-information display.
Under normal conditions, the ABS warning lamp
only comes on when the ignition switch is turned
to the “ON” position and goes off a few seconds later.
CAUTION
l
Any
of the following indicates that the
ABS is not functioning and only the stand-
ard brake system is working. (The stand-
CAUTION
ard brake system is functioning normal-
ly.) If this happens, we recommend you to
have
your vehicle inspected as soon as pos-
sible.
• When the ignition switch is in the
“ON” position, the warning lamp does
not come on or it remains on and does
not go off
• The warning lamp comes on while driv-
ing
• The warning display appears while
driving
If the warning lamp/display illuminate
while driving
E00607301149
If only the ABS warning lamp/display illuminate
Avoid
hard braking and high-speed driving. Stop
the vehicle in a safe place.
Restart the engine and check to see whether the
lamp goes out after a few minutes driving; if it then
remains off during driving, there is no problem.
However, if the warning lamp/display do not disap-
pear, or if they come on again when the vehicle is
driven, we recommend you to have the vehicle
checked.
If the ABS warning lamp/display and brake warn-
ing lamp/display illuminate at the same time
Warning lamp
Warning display type 1
Warning display type 2
The ABS and brake force distribution function may
not work, so hard braking could make the vehicle
unstable.
Avoid hard braking and high-speed driving. Stop
the vehicle in a safe place and we recommend you
to have it checked.
NOTE
l
The ABS warning lamp and brake warning
lamp illuminate at the same time and the warn-
ing displays appear alternately on the infor-
mation screen in the multi-information dis-
play.
Starting and driving
4-50
4
To Next Page
Loading...
