EasyManua.ls Logo

Mitsubishi Lancer Sportback - Page 375

Mitsubishi Lancer Sportback
433 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Open the fuse lid and pull to remove it.
2. On
vehicles with bottom cover, use the pull-
er to loosen the 2 clips (A) and push down
the bottom cover. The puller is in the fuse
box in the engine compartment. Refer to
“Fuse replacement” on page 8-27.
WARNING
l
On vehicles with driver’s knee airbag,
when changing fuses, do not damage the
driver’s knee airbag harness or acciden-
tally strike the airbag area with hard ob-
jects. Improper work methods could re-
sult in an accidental deployment of the
driver’s knee airbag or could turn the driv-
er’s knee airbag inoperable. Either of
these situations could result in serious in-
jury or death.
3. To
put back the fuse lid, line up the fuse lid
hook (B) with the clamp (C) on the instru-
ment panel and push the lid back in.
Passenger compartment (RHD vehicles)
The fuse boxes in the passenger compartment are
located behind the glove box at the position shown
in the illustration.
A- Main fuse block
B-
Sub fuse block
1. Open the glove box.
Maintenance
8-22
8
OG4E12E1

Table of Contents

Related product manuals