Mitsubishi PAR-WT50R-E

EN
13
6.3. Selecting the Temperature Unit (Mode No. 2)
Set the mode no. to “2”.
The temperature reading can be selected between
Celsius (°C) or Fahrenheit (°F).
Press or button to select °C or °F and
press button to conrm the selection.
Mode
No.
Names Functions
Initial
settings
0
Pairing address dis-
play
To view the own pairing address of the wireless
remote controller.
1 Pairing
To perform a pairing process with the wireless re-
ceiver.
2 Temperature unit To select °C or °F. °C
3 Communication test Communication test with the wireless receiver.
4
Room temperature
display
Actual room temperature display OFF
5
Automatic zone no.
display
To enable or disable automatic zone no. display. OFF
6.1. Viewing Address Number (Mode No. 0)
Set the mode no. to “0”.
The display to the right shows that the address is
set to “2”.
Conrm setting by pressing button.
The display stops blinking and lights steadily.
When button is pressed in the middle of set-
ting, the screen returns to the previous indication.
6.2. Pairing (Mode No. 1)
For details, refer to “5. Pairing process”.