9 - 24 9 - 24
MELSEC-Q
9 PROGRAMMING
(5) Program example
<<Basic parameter setting>>
TCP ULP timer value
TCP zero window timer value
TCP resend timer value
TCP end timer value
IP reassembly timer value
Split reception monitoring timer
value
Router relay function
Subnet mask pattern
Default router IP address
KeepAlive
KeepAlive start timer value
KeepAlive interval timer value
KeepAlive resend count
Number of routers set
Subnet address
Router IP address
Number of TCP connections for
GX Developer connection
Local slave station port No.
Target slave port No. for
automatic communication function
CPU response monitoring timer
value
Preferred node specification 1
(IP address)
Preferred node specification 1
(Number of connections)
Turns ON Basic parameter setting
request (Y1).
Module
READY
Parameter
setting
command
To Next Page
Loading...
Need help?
General
