9 - 40 9 - 40
MELSEC-Q
9 PROGRAMMING
(3) Network parameter setting
Set the network parameters on "Network parameter" of GX Developer.
1) Network type : MNET/H (remote master)
2) Starting I/O No. : 0000
H
3) Network No. : 1
4) Total number of (slave) stations : 1
5) Mode : Online
6) Network range assignment
XY setting
7) Refresh parameters
(4) Refresh setting
For the processing equivalent to auto refresh setting (GX Configurator-MB), refer
to <<Refresh processing>> in (6) (b).
(5) Automatic communication function
(a) For a program example for normal automatic communication, refer to
<<Processing for normal automatic communication>> in (6) (b).
(b) For a program example for error code acquisition at an automatic
communication error, refer to <<Handling of automatic communication
error>> in (6) (b).
To Next Page
Loading...
