Mitsubishi QJ71MT91 - Page 207

9 - 45 9 - 45
MELSEC-Q
9 PROGRAMMING
Automatic
comm.
parameter
setting,
normally
completed
Automatic
comm.
parameter
setting,
error
completed
Take corrective action for error completion, referring to Q
Corresponding MELSECNET/H Network System Reference
Manual (Remote I/O Network).
REMFR
instruction
completion
REMFR
instruction
result
REMFR
instruction
completion
Parameter
setting
command
Turns OFF Automatic
communication parameter setting
request/automatic
communication start request
(Y1004) when setting is
completed normally.
Turns ON MODBUS device
assignment parameter setting
command (M200).
Turns OFF Automatic
communication parameter setting
request/automatic
communication start request
(Y1004) and stores error code
and parameter setting result
when setting fails.
Handling of ZP.REMFR
instruction error
R