2 - 9 2 - 9
MELSEC-Q
2 SYSTEM CONFIGURATION
[Serial No, Ver, and Product No.]
Serial No. of the module is displayed in the Serial No. column.
Function version of the module is displayed in the Ver. column.
Serial No. printed on the rating plate is displayed in the Production No.
column. *1
Note that, because the QJ71MT91 does not support the production No.
display, "-" is displayed.
*1: The Production No. column display is active only when the CPU used is
a Universal model QCPU.
POINT
The serial No. on the rating plate may be different from the serial No. displayed on
the product information screen of GX Developer.
The serial No. on the rating plate indicates the management information of the
product.
The serial No. displayed on the product information screen of GX Developer
indicates the function information of the product.
The function information of the product is updated when a new function is added.
(2) Checking the software version of GX Configurator-MB
The software version of GX Configurator-MB can be checked in GX Developer’s
"Product information" screen.
[Operating procedure]
GX Developer
[Help] [Product information]
Software version
To Next Page
Loading...
Need help?
General
