Mitutoyo EH-101P - Page 17

1 Overview
3
No. 99MBC109B
Symbol Name Description
⑧
UNIT indicator
y
Blinks while a HOLD signal is being
input when the I/O connector is
connected.
y
Lights when an E unit has been selected
for the corresponding parameter.
⑨
[SEL]/[CE] key
y
Cancels an operation or an error.
y
Selects Display A or B.
⑩
[P.SET] key Sets a Preset value.
Tips
When setting parameters, this selects the
parameter number.
⑪
[LIMIT] key Sets the tolerance value.
⑫
[MODE] key Sets Peak mode.
Tips
When setting the tolerance, Preset, or
optional constant value, this moves the
current input digit from left to right.
⑬
[A_ZERO]/[ZERO] key Sets the current value in Display A to 0.
Tips
• When setting a parameter, this advances the
set value.
• When setting the tolerance, Preset, or optional
constant value, this increases the value of the
selected digit.
⑭
[B_ZERO] key Sets the current value in Display B to 0.
Tips
When setting the tolerance, Preset, or
optional constant value, this decreases the
value of the selected digit.