Mitutoyo QM-Height QMH-350BX - Page 53

39
3SpecicUsageApplications
No. 99MAF600B
■ Erasing measurement values stored in the memory
1
Press [MODE] twice.
» Characters will be displayed in the bottom row of the
LCD.
2
Press [Outside diameter measurement] to select [M.CLR] (memory clear).
M1 M2
» [M1] and [M2] will be displayed on the lower left of the
LCD.
Tips
If measurement values are not stored in memory, [M1], [M2], and [M.CLR] will not be displayed.
3
Erase the measurement values.
To erase the value stored in both [M1] and
[M2]
Press [ENTER].
To erase the value stored in either [M1] or
[M2]
Press [←]or[→] to select the target for dele-
tion, and then press [ENTER].
4
Press [CANCEL].
» The measurement value will be erased from the memo-
ry, and the regular condition will be restored.