Mitutoyo QM-Height QMH-350BX - Setting The Resolution For Measurement Values

48
3SpecicUsageApplications
No. 99MAF600B
3.5 Setting the Resolution for Measurement Values
You can change the resolution of the LCD.
Tips
The default setting is [0.001 mm] for models that support millimeters and [0.00005 in] for models that support
inches.
1
Press [MODE].
» Characters and icons will be displayed in the bottom row
of the LCD.
2
Press [Scanning measurement] to select [RES.] (resolution setting).
M1 M2
3
Press [↑] or [↓] to select the resolution.
» If [0.005] is selected
Setting Details
[0.001] Resolution: 0.001 mm
[0.005] Resolution: 0.005 mm
4
Press [ENTER].
» The setup is complete and the regular condition will be
restored.