Mitutoyo QM-Height QMH-600AX - Page 20

6
1 Before Using This Product
No. 99MAF600B
■Liquid crystal display (LCD)
① ② ③ ④
⑤
⑥
⑧
⑦
⑩
⑨
Number Functions
①
Displays icons which represent measurement operations.
②
Indicates the result of the tolerance judgment. For details, see "3.2 Judging the Toler-
ance" on page 40.
③
Displayed when registering measurement steps or executing steps that have been registered.
For details, see "3.4 Registering the Order of Measurements" on page 45.
④
Displayed when the batteries are depleted. Replace the batteries or use the AC adapter
(optional accessory).
⑤
Displayed during the following operations.
y [H]: When a measurement value is being held in the display.
y [ABS]/[INC]: When switching between the ABS measurement system and the INC mea-
surement system.
y [PRESET]: When setting a value for the origin.
⑥
The meanings of the following letters, which are displayed during measuring, are explained below.
y [Z
P
]:Thedi󰀨erencebetweentwomeasurementvalues.
y [U]/[L]: Upper/Lower tolerances
y [Z
D
]: Diameter
y [Z
L
]/[Z
S
]/[W]: Maximum/Minimum/Displacement
y [mm]: Millimeters (unit)
y [in]: Inches (unit)
⑦
Displaysthedi󰀨erencebetweentwomeasurementvalues.Fordetails,see "3.1 Calculat-
ingtheDi󰀨erencebetweenTwoMeasurementValues"onpage33.
⑧
Displays the available settings when the [MODE] key is pressed.
⑨
Indicates the available keys for an operation.
⑩
Displays the counted values or measurement values (results). For details, see "2 Basic
Measuring Methods" on page 11.