Mitutoyo QM-Height QMH-600AX - Judging the Tolerance

40
3SpecicUsageApplications
No. 99MAF600B
3.2 Judging the Tolerance
By registering the upper and lower tolerance limits and enabling the GO/NG judgment function, the GO/
NG judgment for measurement values can be automatically performed.
The result of GO/NG judgment will be indicated by the LED lamp on the operation panel or in the LCD.
You can easily determine whether the measurement value falls within the tolerance range.
Operation panel (LED display)
Red: The upper tolerance limit has been exceeded.
Green: The value is within the tolerance range.
Orange: The value is below the lower tolerance limit.
LCD
[NG+]: The upper tolerance limit has been exceeded.
[GO]: The value is within the tolerance range.
[-NG]: The value is below the lower tolerance limit.
Tips
You can change the length of time during which the LED is lit. For details about the setup method, see "3.7 Set-
ting the LED Lighting Time" on page 50.