Mitutoyo QM-Height QMH-600AX - Page 70

56
3SpecicUsageApplications
No. 99MAF600B
■Sending measurement results to your PC
1
Connect the product to your PC using a commercially available micro USB Type-A cable.
Tips
When the cable is connected, the product is in the USB communication state, which depletes the batteries.
Remove the cable when not in use.
2
Run the commercially-available communication software from the PC.
Tips
The communication setups for the communication software should be subject to "■Communicationspeci-
cations"onpage67.
3
Perform a measurement.
» The measurement results will be automatically sent to the PC.
Tips
• For details about measurement methods, see "3SpecicUsageApplications"onpage33.
• Data can also be sent by pressing the [HOLD DATA] key.