Mitutoyo QM-Height QMH-600BX - Page 56

42
3SpecicUsageApplications
No. 99MAF600B
5
Press [↑] or [↓] to display [1].
6
Display [1] in the second position after the decimal using the same procedure described in
steps 4 and 5 .
7
Press [ENTER].
» The current lower tolerance limit will be displayed on the
LCD, and [L] will blink.
8
With the same procedure as in steps 3 through 5 , set the lower tolerance limit to
[+99.995mm].
9
Press [ENTER].
» The setting of the tolerance limit values is complete, and
the regular condition will be restored.