Mode
Mode 2
Forward control
r
r
Throttle control Throttle control
Forward control
*
,,,, g, 4-
*
Backward control
Turn Left/Righ
control
Leftward/Rightward
Turn Left/Right
flight control
control
Leftward/Rightward
flight control
Backward control
Throttle mode switch
Left hand throttle and right hand throttle are available for option at the remote controller. User can
choose different control stick mode as per operation habit. There are 2 stick modes that could be found
as below:
How to change throttle mode
Step t Keep pressing the red button and turn on the remote controller, the remote controller is under
signal connection status {indicated as pic.1);
Step 2. Keep pressing the RTH button
"
for 3 seconds to choose the throttle control mode (indicated
as pic2). The throttle control mode will change according to each press. The mode number is
shown on the LCD screen. The throttle control mode is set at mode 2 by default.
Pic. 1
Pic. 2
Attention: To change the stick mode of the remote controller, please make sure that the
remote controller is under signal connection status (the indicator light keep
flashing). If not, the stick mode could not be changed.
-9-
Mode
Mode 2
Forward control
r
r
Throttle control Throttle control
Forward control
*
,,,, g, 4-
*
Backward control
Turn Left/Righ
control
Leftward/Rightward
Turn Left/Right
flight control
control
Leftward/Rightward
flight control
Backward control
Throttle mode switch
Left hand throttle and right hand throttle are available for option at the remote controller. User can
choose different control stick mode as per operation habit. There are 2 stick modes that could be found
as below:
How to change throttle mode
Step t Keep pressing the red button and turn on the remote controller, the remote controller is under
signal connection status {indicated as pic.1);
Step 2. Keep pressing the RTH button
"
for 3 seconds to choose the throttle control mode (indicated
as pic2). The throttle control mode will change according to each press. The mode number is
shown on the LCD screen. The throttle control mode is set at mode 2 by default.
Pic. 1
Pic. 2
Attention: To change the stick mode of the remote controller, please make sure that the
remote controller is under signal connection status (the indicator light keep
flashing). If not, the stick mode could not be changed.
-9-
To Next Page
Loading...
