6
Safety -- It’s in your interest!
1. Read and understand the Operator’s Manual and all safety signs before operating, servic-
ing, adjusting, repairing or unplugging.
2. Do not allow riders.
3. Install and secure all guards and shields before operating the equipment.
4. Keep hands, feet, hair and clothing away from all moving parts.
5. Place all controls in neutral, stop tractor engine, set park brake, remove ignition and wait for
all moving parts to stop before servicing, adjusting, repairing or unplugging the cutter.
6. Place all tractor controls in neutral before starting.
7. Never operate the mower unless you are sitting on the tractor seat.
8. Do not operate the tractor inside a building unless there is adequate ventilation.
9. Clear the area of bystanders, especially small children before starting.
10. Stay clear of the machine when engaging the PTO. Keep others away.
11. Clean reectors, SMV sign and lights if used, before transporting.
12. When transporting use hazard ashing lights.
13. Do not put hands or feet under machine while tractor engine is running.
14. Do not operate the cutter in a raised position.
15. Objects can be thrown out from the cutter with sufcient force to severely injure
people or pets. Stay away from mower when it is running, keep others away.
16. Remove all sticks, stones and other loose matter in the area before starting.
17. Review operator’s manual annually.
18. It is the responsibility of the owner or operator to read this manual and to train all
other operators before they start working with the cutter.
19. Follow all safety instructions. Safety is everyones business. By following recom-
mended procedures, a safe working environment is provided for the operator, bystand-
ers and the area around the work-site.
20. Untrained operators are not qualied to operate the cutter!
WARNING !
Always block cutter securely before working on or under cutter.
To Next Page
Loading...