6
2 – Pre-Installation Checklist
Physical Location:
A location with adequate clearance around system to conduct service and accessible by
Spectra-Physics
®
personnel.
A temperature controlled room.
Utility services have been installed.
Local building and safety codes are in compliance and have been verified.
When Your System Arrives:
Upon receiving your system, immediately inspect the outside of the shipping containers. If there is
any sign of damage, immediately call Spectra-Physics and file a claim with the carrier.
The InSight
®
X3
TM
crates have been designed to sustain some physical damage.
• If the crate is externally damaged, or any of the shock or tilt indicators show
damage please file a claim with the carrier and notify Spectra-Physics.
The InSight X3 laser is designed to be installed on site by a factory-trained installation
engineer. Do not open the laser packaging prior to the engineer’s arrival unless specifically
told to do so by the factory.
Uncrate and place the system on your work surface.
• Two or more people will be required to lift some equipment.
Compare the packing list with your quotation. Call your Spectra-Physics office about any
discrepancies.
Check that all manuals were received on the included USB drive.
Save all packing and shipping material until the installation has been completed.
Obtain the proper safety glasses and a power meter if installing the laser system
Read the user manual sections titled Receiving and Inspection and Chapter 4: Installation
Customer Signature Date
Phone Number Fax Number
E-Mail Sales Order Number
To Next Page
Loading...
Need help?
General
