MKS TFT24 - VI. Function Parameter Configuration; 6.1 Base Settings (Important, Must Be Set)

Ⅵ
.Function parameter Configuration
6.1 Base settings（Important, must be set）
After getting the configuration file from the technician, you need to configure the printer type settings.
Attention：1.The baud rate in the configuration file must be the same as the motherboard baud rate, so that
you can communicate.
2.Because the touch screen is the use of serial communication, to avoid conflicts with the
USB .When connecting to the touchscreen, it is best not to connect the USB port on the
motherboard.Similarly, when burning the firmware to the motherboard, it is best to unplug the touchscreen
connector.
1. Do not enable multi-language language: Use with the previous text, the text is in the picture, the
displayed language can only be displayed by brushing the picture.
2. Enable multi-language: You can slice the language freely in the language options in the settings, currently
supports up to 5 languages.
# Language (1: Simplified Chinese; 2: Traditional Chinese; 3: English; 4: Russian; 5: Spanish 6: French, 7:
Italian)
#This configuration is valid only when cfg_multiple_language is set to 1.